About us

Copyright © .Shanghai Seven Trust Industry Co.,ltd All Rights Reserved.

should i use 4x4 or 6x6 posts for pergola

Home / should i use 4x4 or 6x6 posts for pergola

How can I extend my deck posts to support a pergola

How can I extend my deck posts to support a pergola? I'd be replacing your 4x4 posts with 6x6 posts that run all the way through. They'll do the job much better than spliced 4x4s, and they'll probably be more appropriate from an aesthetic standpoint, depending on your design. You don't want chicken legs under your nice new pergola.

should I use 4x4 or 6x6 posts for the pergola

should I use 4x4 or 6x6 posts for the pergola. 6x6 Pergola .6x6 Span? Building and Construction DIY . Hi All, I'm in the 'design phase' of my deck and pergola. I'm planning on building the Pergola with cedar 6x6's only. Therefore, instead of using 2x6 rafters, I will use 6x6 rafters and posts.

4x4's for Pergola?

This allow for a secure connection between post and beam with less invasive hardware or penetrations in the tops of the beams. Countersinking lags in the tops of beams exposed to the elements invites decay and failure. Here is a photo of the posts I notched for beam connections a few months and a photo of this odd shaped pergola:

wood

Small pergola 4x4 posts okay? 8 or 12 footings? etc. What did you end up deciding? I don't think I have seen a pergola with 4x4 posts, I would think you would want at minimum 6x6 not just for added strength against load, but also aesthetically too. Pergola : Can I use 4 - 6x6 post, with 2x10 beams sandwitching 6x6 post for

pergola kit with shade sail for 6x6 wood posts

The TOJA GRID Pergola Kit with Sail Shade is perfect for any outdoor living space. Easily attach it to the side of any structure. pergola kit with shade sail for 6x6 wood posts. What type of wood should I use? Any standard dry strht 4x4 wood will work. Our products were made to assemble with standard 8ft, 10ft and 12ft lengths

what size lag bolts for attaching beam to post in pergola

My pergola is 16X16 and will have 6 posts. Please advise <p>I and 39;m building a pergola and would like to know what size lag bolts I should use to attach the beams to the post.</p><p> </p><p>I plan on sandwiching the 6x6 post with two 12X4x16 redwood beams.

How Deep Do You Bury A 6X6 Post?

"CATCH ON How Deep Do You Bury A 6X6 Post? LIST OF RELATED VIDEOS OF How Deep Do You Bury A 6X6 Post? IN THIS CHANNEL : How Deep Do You Bury A 6X6 Post? http

Post to beam attachment with pergola

I have read though DCA6-09 in particular the post to beam attachment details in figure 8. My deck design is fairly close to what is described in figure 19 but I would like to extend the posts up past the deck to support the pergola. If i support the 2 2" thick beams by notching the 6x6 posts that will remove 2/3 of the material.

Building a pergola and wanted to use 4x4 beams and posts

Building a pergola and wanted to use 4x4 beams and posts. I need to span maybe 10 feet I can go to 6x6 but that feels heavy not just literallly but esthetically since it is a small space 10'x 8' Tutor's Assistant: OK. Is there anything else important you think the Structural Engineer should know?

pergola post size 6x6 or 4x4

I am building a small pergola. Should I use 4x4's, or 6x6's for the 4 posts. I want it to look professional and not "rickety".

splits and cracks in 6x6 posts

Re: splits and amp; cracks in 6x6 posts I've been using 4x4 treated post and boxing them out with 1x8 and 1x6 cedar for 16 years. Works great looks nice, we only use them in the corners and the line post are than 4x4 cedar. You will need to block the 4x4 treated post so as not to wrap the 4x4 and it will give the boxed post stabliity. Steve Scholl

Pergola Plans: Assembly 4×4 post and support beams Page

Use a temporary brace to hold them in place if necessary. Cut the ends of the support beams as shown above. Here are more designs you can use for the ends. Install the support beams to the 4×4 post using 3 outdoor screws. Use clamps to position and hold them in place. The support beams will stick out 12 on both ends.

To use 6x6's or 4x4's? TigerDroppings.com

I am helping a buddy build a pergola/arbor this weekend and was wondering if the OT would use 4x4's or 6x6's as the posts. It will be about 10x10 so probably not too heavy. They will be sunk with concrete. He wanted to use 4x4's. If it were mine I would use 6x6's but I generally overbuild.

What size support posts should I use for my deck? We

Apr 25, 2019- What size support posts should I use for my deck? We recommend using 6x6 posts instead of 4x4''s because they are stronger and provide more surface area to support beams.

How to Build a Pergola how-tos DIY

The depth of your hole should be about 1/4 of the height of your post. For a 6x6 post, the diameter of the holes should be about 12 inches square. As a rule the width of your post hole should never be less than 10 inches. You want holes deep and wide enough to easily support a standard 4x4 post.

Pergola owners/builders: what should I watch out for

You really should have a footer under each post. However, most people just bolt it directly to the slab. You can accomplish this by saw cutting the concrete, digging a deeper hole, and filling with concrete. I use 6x6 posts, anchored with a Simpson post bracket, and secured using a 6" red head anchor with nut.

Copyright © .Shanghai Seven Trust Industry Co.,ltd All Rights Reserved.